The Vault has a search box. It finds files and folders by name in My Files, Inboxes, Downloads, the Trash, group directories and what is shared with or by you, or only in the locations you choose. Filters narrow a search by file type, location and project, and can also be typed (type:, in: and project:). The box suggests filters while you type and keeps your previous searches until you log out. Results show each match's location and project, and can be opened, sorted, selected, downloaded, transferred and dragged like other Vault entries. Press / or Ctrl+K (Cmd+K on a Mac) to start a search. The box shows only when the backend can search directories, which needs the matching backend update
The user overlay shows the user's ID under their name, with a button that copies it, so users with the same name can be told apart
In Management, each user under Authorized users in a running VM's details has a button that copies the user's ID
Management has a VM Access Rules table, with backend 3.16.0 or later. A rule lets the VMs of chosen VM configurations reach a server (a domain name or IP address) on given ports over TCP or UDP, either always or for a limited time. With time-limited access, a VM configuration's users open access from its menu or from Network access in its details, for up to the rule's maximum number of minutes, and can close it again. Super-admins create the rules
A global licensing server can be edited: its server, ports, protocol, group and deactivation date, and whether it is active. Before, it could only be deleted and registered again
Creating and editing a VM configuration is now a step-by-step form in a larger window, with the steps Name and team, Project, Co-owners, Hardware setup, Drives, Advanced and Review. The hardware setup is picked from a list that can be filtered by name, cores, memory, devices, operating system or realm. Drives are dragged, or added from the keyboard, as the home drive and as extra drives. The Review step shows the whole configuration before you save it, and when editing you can go straight to any step. Before, it was a single form
On a running VM, Power is greyed out, with the reason, for the VM's managers and regular users. Only its owner, its co-owners, and Sub-admins and above can use it. Before, everyone saw Power, and it failed with a permission error
A co-owner's Power options stay greyed out until the VM's owner has added them to the running VM. Before, the shutdown failed with a permission error
A VM configuration's Power options and its Stop VM button are greyed out, with the reason, for those who may not shut its VM down, while the VM is starting and while it is shutting down. Before, they failed with an error, and only owners and Super-admins saw Power
Restart is greyed out for a VM without a VM configuration and for users without the permission to start VMs. Before, Restart only shut such a VM down or left it stopped
In a browser, "Open remote application" and "Open SFTP pathway" in a VM's menu are greyed out with "needs tiCrypt Connect", and so are the VM page's Start Remote Desktop and SFTP to VM cards
In a VM constellation, Create worker template and Refresh are greyed out while the VM is not connected; before, they showed an error
Formatting a new drive on a VM is refused up front without the permission to share drives, which saving the drive's key needs
In a VM's menu, "Sync user permissions", "Restart controller" and "Open VNC terminal" are greyed out, with the reason, for users who would be refused: users who are not managers of the VM, users without the VM permission to restart its controller, and users who are neither the VM's owner nor a Super-admin. Before, they could be clicked and then failed
"Remove user access" and "Remove from VM" are greyed out, with the reason, when the user to remove is a manager of a running VM that you do not own. The server lets only a VM's owner remove its managers; before, the removal could be started and failed half-way
In the Vault's Sharing column, files you shared show the arrow and then who you shared them with, without your own picture first. Up to six people or groups are shown before the "+N" count, instead of three
Compute disk usage is offered in the Vault only when the selection includes a folder; before, it was also offered for files, where it ran an empty task and changed nothing
In a browser, the Vault's My Computer buttons (file transfer, and transfer and connect settings) are greyed out and say "My Computer needs tiCrypt Connect"
Deleting an annotation in the video annotator now asks for confirmation first; before, one click on the delete button removed it for good
Deactivating an account in Management now starts with an empty reason that must be filled in; before, an approved account's reason field already held "Account disabled pending administrator approval."
A user's registration comment Delete button is greyed out, with the reason, for admins without the Edit User Metadata permission; before, it failed with an error
A user profile's Matching Users card is left out for admins who cannot view all users; before, it always said no users match
Management > Service VMs offers "Libvirt XML description" only for running service VMs; before, it was offered for stopped ones and ended in an error
Management > Hardware Profiles offers Edit and Delete only for profiles in Nutanix realms; before, they were offered for every profile and refused the others with an error
"Mark as expired" is offered only for certifications that can be marked expired; before, it was also offered for certifications of requirements that never expire, and then refused with an error
Bulk email on running VMs now also lists each VM's owner
Management > Licensing Servers is now called Global Licensing Servers, and its permissions are named View, Create, Edit and Delete global licensing servers
Port ranges of a global licensing server, such as 8000-8010, are saved as one range instead of one entry per port. Ranges that overlap and ports that follow each other are combined, for example 1, 2, 3 becomes 1-3, and servers saved with a range split into single ports get the range back the next time they are edited
My Profile's Projects tab is greyed out, with the missing permission in its tooltip, for users who may not view the members of their projects; before, it loaded forever
Confirmations with a red button, such as Delete group and Remove my access to a shared file, close only with their buttons, like the other delete confirmations; before, a click outside them or Esc closed some of them
After clearing a search field with its × button, the cursor stays in the field, ready to type again
Ctrl + mouse wheel now zooms like a web browser: wheel up zooms in and wheel down zooms out; before, it was the other way round
On a Mac, Lock session is Cmd+Shift+P and Log out is Cmd+Shift+L, like the app's other shortcuts; before, they were Control+Shift+P and Control+Shift+L. Windows and Linux keep Ctrl+Shift+P and Ctrl+Shift+L
In tiCrypt Connect on Windows and Linux, Ctrl+W quits Connect after asking, like its Close Window menu item; before, it hid the window, which could not be shown again
Escrow: on deployments with server-side credentials, Recover User Key now saves the key file first and asks you to confirm that it was saved before it finishes. Before, the user's previous key file stopped working even when the save was cancelled, and nothing said so
Escrow: while key parts are being shared, another share from the full view is refused with a message until the first one has finished
Escrow: a recovered key file is saved under the name shown in the form, such as jdoe_2026-11-10.key.json. Before, ".txt" was added to the name
The Vault's Sharing column shows who your files are shared with as soon as you open a folder you opened before, and no longer goes blank and back while the folder reloads. In a folder opened for the first time, the arrow shows at once and the people and groups follow. Before, the column stayed empty for a second or two each time a folder was opened
While a Vault folder loads for the first time, the previous folder's files are no longer listed; before, they stayed selectable for a moment and offered the new folder's actions, such as the Trash's permanent Delete
The Vault and group folder trees react faster when many folders are open
When renaming a file or folder fails, in the Vault or on a VM, an error message now says so; before, the rename dialog had already closed and only the task tray showed the failure
A copy of a file named like "report (0).pdf" keeps the space before "(0)" when that name is taken, for example "report (0) (1).pdf"; before, it became "report(0) (1).pdf"
The upload dialog's not-enough-space notice gives each size once, such as "Available space is 0 B, but you need 12 B."; before, it said "0 bytes but you need 12 B bytes"
Uploading a folder no longer leaves out the files of subfolders with names such as "constructor" or "toString". Before, those files were skipped without any message
Uploading or copying two items with the same name into one folder in a single operation now keeps both, the second with a number after its name. Before, the second one failed. This affected folder uploads by users who may not create folders, where all files go into one folder
An upload that fails before the file is placed in its folder no longer leaves a hidden file behind on the server. Before, such a file stayed there with no way to see or delete it
When you upload a folder but may not create folders, the Upload dialog now says that this is why the files are placed directly in the destination folder. Before, the folder structure was dropped without any explanation
Dragging files from a VM or from another Vault folder onto a group's folder now says at once when you lack the group's permission to add files, as dragging files from your computer already did. Before, the drop was offered and then every file failed
Deleting files permanently or emptying the trash no longer ends as failed when the files were deleted and only reloading the folder afterwards failed
After the first upload, new folder, rename or unshare in a session, opening the Vault no longer reloads the shown folder one extra time each time
Copying files in the Vault asks for confirmation right away, even while an upload or another copy is running, and other file operations no longer wait while the question is open. Before, the question appeared only after the running operation ended
Moving a file or folder in the Vault can no longer leave it in neither folder. Before, an error in the app right after the move was done made the move undo itself halfway, which took the item out of its new folder as well
Moving a file into a folder that already holds that same file now only takes it out of the old folder. Before, when the file was the first item of that folder, the move failed on the name or listed the file twice
A folder you extract an archive into without opening it first keeps all its content in the Vault. Before, it listed only the extracted folder until it was refreshed
Adding a file to a very large folder no longer reports a failure when the file was added and only reloading the folder failed
When an inbox cannot be fully deleted, its folder stays in the Inboxes list, so you can see it is still an inbox and delete it again. Before, the folder left the list while an access point could still receive uploads
Sharing a file with a group whose folder the Vault has not listed yet (for example a group you were just added to) no longer shows an error although the file was shared, and the file now appears in the group's folder
The Remove Share confirmation in Shared With Me names the file, or counts the files and lists their names; before, it only said "this file(s)"
Expanding a folder in "Select directory to extract into" now only opens the folder; before, with a folder already selected, it closed the dialog and started extracting into that folder
Close in the Edit group dialog closes it; before, it did nothing and only Escape left the dialog
Manage access points: the delete button of an access point waits until its deletion ends; before, a second click could start a second deletion that failed
Opening a file preview no longer waits for a running Vault download; before, the preview kept loading until the whole download had finished
.webp images now open in the image viewer, and .jpeg, .m4v and .mpeg files open in the image viewer or video player even when no file type was saved with them (for example files uploaded through an inbox link); before, the preview said the file type cannot be previewed. Files uploaded through an inbox link are also saved with the right type for .jpeg, .tif, .webp, .docx, .xlsx, .pptx and .gz
A .tia archive that leaves out a folder now opens in the preview, with that folder's files at the top; before, the preview failed with "Cannot read properties of undefined"
File preview: the Previous/Next file tooltips mention Shift+P and Shift+N only for videos, where those keys work; before, they offered them for every file
In browsers that cannot blur what is behind a panel (reported in tiCrypt Connect on Linux), the file preview has a background of its own; before, the Vault page showed through its top bar
After leaving fullscreen with Esc, the video player shows the Fullscreen button again; before, it still showed "Exit fullscreen" and the next click did nothing
The video player's volume button turns the sound back on after the volume slider was dragged down to 0, and its tooltip says Mute or Unmute instead of Play/Pause
Clicking the video timeline before the video has loaded no longer fails, and a click no longer first jumps back to an earlier time
The "Annotations exported to …" message names the drive; before, it showed the drive's raw ID
On the Vault page, selecting files under My Computer shows their actions (Transfer to Vault, Compute disk usage) above the list, and the header says My Computer; before, the header showed no actions and said VM
Files downloaded to your computer with Download (and the folder picker) appear in the Vault's Downloads folder; before, only files dropped on Downloads did
Download to My Computer works after you are removed from a project while logged in; before, every download failed with "Subsession request contains projects not present in parent session" until you logged in again
The Vault in a browser no longer tries to start My Computer; before, its buttons failed with "HTTP 404 Not Found" and every Vault visit added errors to the debug logs
After mounting drives in Transfer setup, My Computer opens the first newly mounted drive; before, it stayed where it was
The Drives tab in My Computer lists every drive after you log out of a credential; before, it could stop partway and leave drives out. Drive emails also show as soon as the credentials load
A reopened File Transfer window that showed a VM folder (for example after reloading tiCrypt) opens on that folder again; before, it could show an error instead of the VM's files
The Owner tag in the Virtual Machines list stays yellow while your VM starts and runs. Before, it turned blue, the colour of the Co-owner tag
Search boxes that remember their text (Virtual Machines, drives, Terminal Hub, VM details, task details, project filters in Management tables, video annotator, Escrow) show the saved search again when you come back, and the list is filtered by it; before, the box came back empty
Previous from a running VM's details now goes back to its configuration's details and stays there; before, the VM's details opened again, so you could not go back
Co-owners can restart a VM from its Power options. Before, Restart was greyed out with "Only VMs you own can be restarted"
Force shutdown now powers off a VM right away even while a normal shutdown of it is still in progress. Before, it did nothing until the normal shutdown gave up, up to 2 minutes later
A VM configuration whose shutdown failed shows its previous state right away and can be shut down again; before, it kept showing "Stopping" for a while and could not be shut down again
Connecting to a VM that has stopped now fails right away and says the VM has shut down. Before, it waited 10 minutes and then said the VM "hasn't shut down"
Forwarding an application or SFTP outside tiCrypt Connect now says it needs tiCrypt Connect; before, it failed with "bad TLS certificate (BUG)"
Screen readers list only the title and the sections of the VM configuration window as headings. Before, the names of its drives, project, co-owners and settings were announced as headings too
Drive and hardware setup pickers offer a drive or setup you cleared again right away; before, it was missing from the list until you typed in the search box
Deleting several drives when one of them was deleted meanwhile now deletes the others and marks that drive as not accessible; before, nothing was deleted
A new drive whose key cannot be saved after it is formatted is unmounted again, and the task says why; before, it stayed mounted and anything stored on it was lost once it was unmounted
On a VM's Drives panel, "Detach drive(s)" and "Detach and remove" with several drives selected now ask about each drive in turn; before, only the first drive was detached and the others were skipped without a message
"Remount drive(s)" with several drives selected mounts them one after another; before, a second drive that had to be formatted failed with "Cannot open multiple modals of the same type in sequence"
Detaching a VM's RAM disk or NFS mount shows its name; before, the confirmation and the task read "[unknown-drive:ramdisk]"
"Unmount and detach" in a VM's file tree no longer reports a failure for a RAM disk or an NFS mount that it did unmount
A drive's key is now cleared from the browser's memory when mounting the drive on a VM fails or is canceled; before, it was cleared only after a mount that worked
VM file explorer: a folder that is an access directory, or has one inside, can no longer be renamed. Before, the rename went through and the access directory pointed at a folder that no longer existed
"Sync all groups" on a VM now shows an error with the reason when the sync fails; before, a failed sync showed nothing
Removing a member from a VM group now says "Remove (member) from (group)" in the dialog and the task; before, the task was named "Delete (group) from (VM)" although only the member was removed
"Fix co-owner permissions" on a VM now warns how many co-owners were repaired when some could not be; before, it said "Co-owner permissions repaired" even though some failed
Removing a manager from a running VM that you do not own no longer takes them out of the VM configuration while they stay a manager on the VM; the removal is now refused before anything is changed
Saving a VM configuration after removing a co-owner no longer stops when that co-owner cannot be removed from the running VM; the save finishes (revoking and sharing drive keys, syncing users) and a message says who stays on the running VM until its owner removes them
Saving a VM profile that no other user has no longer starts an empty task named "Update 0 to (VM)"; the task now reads "Update the permissions of N users on (VM)" and counts only the users it updates
"Detach and remove" on a VM's drive and "Set project" on a VM no longer undo what another owner changed in the VM configuration in the meantime, such as a drive they recorded or a co-owner they added
Drive key instructions: the name of the file to copy now ends in ".qcow2" and the unmount command is "sudo umount"; before, they said ".qcow" and "sudo unmount", which does not exist
In a VM's user list, a co-owner whose role or permissions you change still shows as Co-owner. Before, they showed as Manager until the list refreshed
In a VM's drive list, a scratch or NFS drive you just attached shows its Attached time right away. Before, the column stayed empty until the list refreshed
A VM profile panel opened before the VM's profiles had loaded now fills in once they load; before, it kept showing only the profile ID
VM user and VM profile panels now show the manager icon for managers and co-owners; before, every role showed the user icon
VM managers no longer see Edit membership, Delete or Remove on the built-in Everybody, Nobody and Managers groups, or Edit and Delete on built-in ACL templates
A built-in ACL template's panel now offers Replace ACL template, as the ACL template list does
An ACL template's usage now fills in once the VM's access directories and groups have loaded; before, it could stay empty
Deleting a VM access directory or ACL template now says "You deleted this access directory" or "ACL template" instead of "setup"
The "not connected" notices of the VM Slurm Jobs and ACL template panels now name Slurm jobs and ACL templates
The VM info JSON export lists only the permissions each user or profile actually has; before, it listed every permission of their role, even ones they do not have
In a VM constellation, Refresh no longer stays disabled with a spinning icon after a failed refresh
A deleted worker template now leaves the Inactive list right away, and the Stop all task shows a stop icon instead of a "plus" icon
Deleting a folder on a VM is no longer refused because a different folder whose name starts the same (for example "data" and "data2") holds an access directory
A VM folder that was never opened shows all its contents after a symlink is created in it; before, it listed only the new symlink until refreshed
Previewing a link to a file of 1 GiB or more in a VM now says the file is too large to view; before, the preview kept loading forever or the VM first read the whole rest of the file
With the logs panel open for a VM that has no logs, tiCrypt no longer reconnects to the VM every few seconds after it disconnects
Terminal Hub: when force-closing a terminal fails, you now see only the error and the dialog stays open; before, it also said the terminal was closed
Terminal Hub: a VM's fold button tells screen readers that its terminal list is expanded from the start; before, the list could be announced as collapsed while it was open
On a Mac, the terminal's keybindings show ⌘C and ⌘V for copy and paste; before, they showed Ctrl+Shift+C and Ctrl+Shift+V
A system setting an admin saves (for example clipboard access or the session lock timeout) now applies in that admin's own tab right away; before, it took effect only after a page reload
Management tables show the new name of an item right after a rename; before, its Name cell kept the old name, even after Refresh, until the view was opened again
Management tables show changes that arrive right after you open a row, such as a user you disabled or a VM you deleted in its details; before, the table could keep showing the old row until the next refresh
Each Management view opens without the column filters typed in the previous view; before, a Name filter typed in Teams stayed applied in Security Levels, which then looked empty
Drop-down column filters in Management offer the values of the table shown; before, after switching views, a filter such as State in Libvirt Hosts could offer the previous view's values (VM states)
All Projects and All Teams keep their filter row and the column widths, order and sort you changed; before, these were lost every few minutes when custom fields refreshed
A table whose data fails to load now shows the error; before, it kept saying "Fetching information from the server..." forever
In Management, refreshing Security Levels, Security Requirements, Users, Projects, Resources by Project and Resources by User now works for admins who may not view every project, team, security level, certification, project's members, VM or drive; before, the refresh showed an error
Refreshing the Devices, Security Requirements, Active Jobs and project Certifications tables loads their data once instead of twice, and changing a user profile no longer reloads every user
In Management tables, pressing Refresh, moving off the button and releasing no longer switches automatic refresh on or off
The pin button of an action that is pinned by default (in table and detail action menus) now unpins it on the first click; before, the first click did nothing
CSV exports of tables now write date-and-time and expiration columns (for example Timestamp, Last ping, Expires) as dates; before, they held raw numbers such as 1762439415000
In Management, clicking a column header in the Simulate Allocation, Check utilization and service View logs windows sorts the rows; before, only the sort arrow moved
In Management, deleting a team or project no longer leaves an empty "No Team Assigned" or "No Project Assigned" row in the Teams and Resources by Project tables
Management > Teams, Resources by Project and Resources by User no longer show 0 cores and 0 memory for running VMs, and Users no longer shows "[unknown-team:…]", when the hardware setups or teams load after the VMs or memberships; before, the numbers stayed wrong until the next refresh
Quota cells in Management, such as the Cores and Memory of a team, show the new quota right after Edit quotas; before, they kept the old quota until the view was opened again
Saving a team without changes now says "No changes made" and sends nothing; before, an update was sent when the team had no intake ID or no custom field values
When adding users to selected teams, the task title and its error messages name the users and teams the right way round. Before, the title could read "Add/delete 2 users to 3 users"
Removing several project members shows its icon in the task list again. Before, the icon was blank
Revoking several management rights at once no longer fails as a whole when one of them was removed in the meantime
In another user's profile, the VM Configurations table no longer offers Start; before, an admin could start a launch for someone else's configuration that then failed partway
A user's empty VM Configurations and Running VMs tabs now say the user has none; before, they talked about all configurations or VMs in the system
Profiles with the same rank and permissions as an existing one are still refused, and users are still named by their profile, after a user or profile with permission names this version does not know was loaded; before, a copy of an existing profile could then be saved and users could show no profile
An expired project membership of yours leaves your profile's Projects list right away; before, it stayed in the list after you edited or opened it
In an onboarding template, the action that takes a team, project, certification or VM configuration out of the template is now called "Remove from template"; before, the team one was called "Delete onboard template(s)"
Onboarding with a template project saved without an expiration now makes an existing member's membership never expire, as the template says, when the template is set to modify existing memberships; before, the member kept their old expiration date
JSON Export on a running VM you aren't authorized to connect to now says why; before, nothing happened
Bulk email now says so when there is no one to email; before, nothing happened
Deleting a hardware setup: each affected VM configuration now says why it is affected; before, every row repeated the setup's name
Deleting a hardware setup that nothing uses no longer shows a red alert
Deleting a hardware setup that VM configurations still use now asks you to confirm a force delete and warns that those configurations may stop working
When more than 3 hosts can run a hardware setup or service VM, only their number is shown; before, the full list of host names was shown under it too
Registering a global licensing server: the deactivation date can now be any day from tomorrow on; before, only the day after tomorrow was accepted
In Management, a service's View logs window says why the logs could not be loaded; before, it said "No logs found" or kept showing the earlier logs
Get Logs is greyed out while logs load, so a second click no longer starts another load whose answer could replace the first
The volume picker in Create new VM image shows the correct "on disk" size; before, it was 1024 times too large (for example 1 GB instead of 1 MB)
In Management > ISOs > Create from volume, picking another volume now updates the realm and the suggested name; before, they stayed on the first volume and Create failed with "The selected ISO volume does not belong to the selected realm"
The Libvirt Volumes table in Management keeps updating when a realm is removed while its volumes are listed, and those volumes show the realm ID until they reload; before, the table stopped updating
Download in "View all details" for a Slurm job or node saves the details as readable lines in a .txt file; before, it saved one quoted line full of \n marks, named .json
Management > Slurm > VM Accounts offers Remove Slurm Account when several rows are selected; before, selecting more than one row showed no actions
In Management > Nodes, every row of a Slurm node that is in several partitions shows the node's name and offers View and the node's details; before, the rows after the first showed "node:partition" and their details were empty
The Slurm Past Jobs and User Accounts tables show the VM configuration's name when the configuration's VM is stopped and after your own VM configurations reload; before, they showed the raw Slurm account
Slurm Past Jobs shows a one-day time limit as 1-00:00:00 and durations longer than a month with the full number of days; before, one day read 00:00:00 and longer durations had the wrong number of days
CSV exports of the Slurm tables write durations such as Elapsed and Time Limit like the table, for example 01:02:03 or 1-00:00:00; before, they were in milliseconds
Closing the dialog that shows a new API key closes it; before, it asked "Discard unsaved changes?" although the key was saved
Create and Cancel are greyed out while an API key is being created; before, a second click on Create made a second key
The preview in "Create a new custom field" says to pick a type, or to enter an ID, before it can show the field; before, it showed raw data starting with "Control is invalid"
Removing an entry from a list (device tags, Libvirt host lists, External Servers, Headers) no longer saves the form or closes the dialog; before, the first Remove click submitted the whole form
These buttons now stay greyed out until their request finishes, so a second click no longer sends it again: Create in Create raw image and in Create ISO from volume (which made a second ISO), Register and Update in the Libvirt host form, Create pool and Update pool in the Libvirt storage pool form, Create and Cancel in the access directory form, Save, Cancel and Remove quotas in the team quotas form, and Finish registration on the Escrow registration page
A form with a size (GB/TB), custom fields or VM hardware settings stays greyed out until its save finishes; before, it could become clickable again while it was being saved
If the server's version information could not be loaded when the page opened, it is loaded again when it is next needed; before, saving or creating VM configurations and other actions that check the server version failed until the page was reloaded
A page lock timeout of 0 in the deployment settings now means the default 15 minutes after login too; before, the page locked again right after every unlock
Login now stops with a message if the server keeps asking for the key to be escrowed after it was escrowed; before, the login repeated forever
Logging in with a damaged key file now says that the key file's public key is invalid; before, the login failed like a wrong password, with nothing in the logs
Logging in to an account that still waits for an administrator's approval now says so; before, it said the account had been deactivated
Back while signed in (the Delete key and Cmd+Left in tiCrypt Connect on macOS, a mouse's back button) no longer opens the login screen; before, it looked like a logout, while the session stayed open and dialogs left on top of the login screen still worked
The "Since you last logged in" window opens faster when several certificates or projects changed; before, it looked them up one at a time
Changing two of your settings in quick succession (for example the toolbar position and then its type) now saves both; before, one of the changes could be lost after the next login
The browser tab shows how many notifications you have as soon as you sign in. Before, the count in front of the page name, such as "(3) Vault - tiCrypt", appeared only after a new notification arrived, and it was not updated when the notifications were reloaded after the connection came back
Announcements from an admin outside your teams now name the admin in Notifications and in the pop-up message; before, they showed "[unknown-user:...]" instead of the sender's name
Project announcements now name the project in Notifications for every member; before, members whose first screen was not the Vault (such as Sub-admins starting on Management) saw "[unknown-project:...]"
Information messages at the bottom of the screen are readable in the Light theme; before, their white text was on light grey
The tiCrypt icon shows again in the browser tab for the app, the inbox and the MFA window; before, the tab showed a blank or default icon
The "You removed …" notice, the PURGED key timer in the user menu and the user and group names in File History show their icons again; before, the icons were blank
The task for removing a drive's or group's project tag is tinted again, and the credential Logout task uses the theme's error colour instead of a fixed red
The task for removing the project tag from VM configurations and their drives shows its icon in the theme's warning colour, like the same task for groups and drives; before, the icon had no colour
A task that fails as soon as it starts now shows as failed in the task tray; before, it could stay busy forever
Task details: new log lines of a running task now show while the logs are filtered; before, only the lines there when you typed the filter were searched
Project overlay: after minimizing and restoring it, you are back on the view you had open; before, it always showed Members
Pressing Escape in an actions menu inside an overlay now closes just the menu; before, it closed the whole overlay
Keyboard shortcuts are shown with your own computer's key names: ⌘, ⌥, ⌃, ⇧ and ⌫ on a Mac; Ctrl, Alt, Shift and Backspace on Windows and Linux. Before, the shortcuts list showed "alt + arrowleft" on a Mac and Mac symbols on Windows, and the documentation search said Ctrl + P on a Mac, where it is ⌘ + P
In the documentation search, the Down arrow on the last result goes back to the first one. Before, the first press did nothing and the highlight disappeared
After you press Escape and then click into a field, Tab goes to the next field. Before, it jumped to "Skip to main content" at the top of the page
Shift+~ opens the user menu; before, it did nothing
The key and session timers in the user menu show the time left correctly when it is more than an hour and in every time zone; before, they started again at 00:00 after an hour and were off by 30 minutes in time zones such as India's
Ctrl + mouse wheel zooms tiCrypt in Firefox too
The zoom percentage in the corner shows the real zoom (for example 113% instead of 106%), and stays visible after you sign in or open another login page; before, it disappeared while the page stayed zoomed, and the next zoom step jumped
Screen readers now announce the taskbar's tab overview and Show tasks buttons and the edit and delete buttons in Management > Custom Fields by what they do; before, they were read as a number or just "button"
"Download Debug Logs" keeps the details of errors, such as the server's status and message and where the error happened; before, many lines only said "[object Object]"
Canceling the profile picture, logout, task details or annotation export windows no longer adds an "Uncaught error" entry to the downloadable debug logs
In tiCrypt Connect on a Mac, Cmd+W hides Connect and clicking its Dock icon brings it back; before, the window stayed hidden until Connect was quit
In tiCrypt Connect's User settings, the Default and Single toolbar layouts show their own preview pictures; before, the two pictures were swapped
Escrow: hiding the task widget now lasts until a new task starts; before, it came back on the next progress update
Escrow: a user whose key was escrowed before an escrow group was added can be recovered once you hold every part of their key. Before, such users stayed "Started (2/3)", "Recover user key" was missing from their menu and quick start did not list them
Escrow: when the key parts of some users cannot be loaded, the other users still show their status and "Recover user key", and the message says how many users failed. Before, every user showed "Not started" until a refresh succeeded
Escrow: starting "Share keys with other Escrow users" or "Share all key parts with user in my group" again while a share is running no longer adds the same key parts twice
Escrow quick start: while the users' key parts are loading, "Recover a key" and "Share all key parts" say that they are loading and "Share a key part" shows a notice. Before, they read "There are no recoverable user keys" and "Cannot share any keys"
Inbox upload page: when the partly sent copy of a failed upload cannot be renamed to end in ".incomplete", the error now says so and that the copy still has the file's name; before, this was only written to the log
